purchase nail making machine

purchase nail making machine convenience to move low noise low powder consumption reasonable price

 nail making machine  

 

nail making machine  is a production facility which used to make nail.

 

do you want to purchase nail making machine? It  is a special purpose machine which is designed for processing various size of nails. The assortment of our products is complete. The nail machine is used for producing various nails and special nails. It has wide uses, simple operation, and reliable run. We will supply various machine fittings and necessary fine auxiliaries for you. 

 

 

Item	Product name	Model	Main purpose	diameter of wire	Power(kw)	Weight (kg)	Designed output
1	Nail making machine	Z94-5.5C	Manufacturing 4-6 inches of nails	3.8-5.2mm	5.5	2300	200pcs/min
2	Nail making machine	Z94-4C	Manufacturing 2-4 inches of nails	2.8-4.5mm	4.0	2000	260pcs/min
3	Nail making machine	Z94-3C	Manufacturing 1.5-3 inches of nails	1.8-3.1mm	3.0	1000	300pcs/min
4	Nail making machine	Z94-2C	Manufacturing 1-2 inches of nails	1.2-2.8mm	2.2	800	350pcs/min
5	Nail making machine	Z94-1C	Manufacturing 0.5-1 inches of nails	0.9-1.8mm	1.1	500	450pcs/min

 

 

 

 

 

 

Raw Material of nail making machine: The diameter of Q195 steel/Q235 steel is 6.5mm in the market. The user can draw the steel wire by wire drawing machine. After get the diameter of steel wire you need, and then can make nails by automatic nail making machine. Features of nail making machine  (1) The machine has attractive appearance, rational structure and high efficiency. It's also v durable in use, easy to maintenance with adequate durability. (2) All the main components are made of quality steel, such as shaft, cams and gear. (3) Use control handle at the inlet place in order to control incoming line at any time during operating. (4) A friction gear is installed between crankshaft and flywheel. It plays a protective role of safety when the machine breaks down or overloaded. (5) The machine makes use of full automatic production procedure. Once start, it could make nails continuously.

 

 

Process flow:

Waste rebar---A or B wire drawing machine---nail making machine(you can choice one type)---polishing machine---finish nail---packing

 

1, wire drawing:

You should choice which rebar do you need to make nail after you buy the nail making machine, such as new rebar, new steel wire, waste bar and so on. Waste bar is inconvenient when wire drawing, it’s slow than new rebar, but waste bar cost is very low, then the profit is very good. If you use new steel wire, the speed of produce nail is quickly.

2, nail making:

Put the wire in automatic wire feeder head pulley, and adjust the size of nail in advance.

3, polishing:

Using polishing machine polishing the semi-finished nail, add some saw powder, paraffin, oil and other material in the machine.

4, packing:

User can packing the nail as their need.

 

 

 

The maintain of nail making machine

1, No adjust when the machine is working

2, Keep the machine clear, wash the nail mould regularly, don’t use rust the steel wire making nail.

3, before pull the inlet wire hand shank, the nail machine should be open in advance. Stop inlet wire when you want to turn off the nail machine.

4, keep the nail knife sharp.

5, Note the temperature changes of each rub parts and abnormal noise in the machine running.

6, Turn off the powder supply before you fix the machine.

7, Use original specification when you need change some equipment parts.

8, lubrication the machine regular, when use a new machine, it should be lubricated mass in 15 days.

9, Don’t running the machine after dismantle the protective cover.

 

 

 

other questions, contact me freely!

purchase nail making machine